Tuesday, December 3, 2013

Oracle Interview Questions - New Set of Oracle Interview Questions

Oracle Interview Questions

1. Explain the difference between a hot backup and a cold backup and the benefits associated with each.
A hot backup is basically taking a backup of the database while it is still up and running and it must be in archive log mode. A cold backup is taking a backup of the database while it is shut down and does not require being in archive log mode. The benefit of taking a hot backup is that the database is still available for use while the backup is occurring and you can recover the database to any point in time. The benefit of taking a cold backup is that it is typically easier to administer the backup and recovery process. In addition, since you are taking cold backups the database does not require being in archive log mode and thus there will be a slight performance gain as the database is not cutting archive logs to disk.
2. You have just had to restore from backup and do not have any control files. How would you go about bringing up this database?
I would create a text based backup control file, stipulating where on disk all the data files were and then issue the recover command with the using backup control file clause.
3. How do you switch from an init.ora file to a spfile?
Issue the create spfile from pfile command.
4. Explain the difference between a data block, an extent and a segment.
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
5. Give two examples of how you might determine the structure of the table DEPT.
Use the describe command or use the dbms_metadata.get_ddl package.
6. Where would you look for errors from the database engine?
In the alert log.
7. Compare and contrast TRUNCATE and DELETE for a table.
Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces few rollback data. The delete command, on the other hand, is a DML operation, which will produce rollback data and thus take longer to complete.
8. Give the reasoning behind using an index.
Faster access to data blocks in a table.
9. Give the two types of tables involved in producing a star schema and the type of data they hold.
Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.
10. What type of index should you use on a fact table?
A Bitmap index.
11. Give some examples of the types of database contraints you may find in Oracle and indicate their purpose.
  • A Primary or Unique Key can be used to enforce uniqueness on one or more columns.
  • A Referential Integrity Contraint can be used to enforce a Foreign Key relationship between two tables.
  • A Not Null constraint - to ensure a value is entered in a column
  • A Value Constraint - to check a column value against a specific set of values.
12. A table is classified as a parent table and you want to drop and re-create it. How would you do this without affecting the children tables?
Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.
13. Explain the difference between ARCHIVELOG mode and NOARCHIVELOG mode and the benefits and disadvantages to each.
ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any point in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any point in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.
14. What command would you use to create a backup control file?
Alter database backup control file to trace.
15. Give the stages of instance startup to a usable state where normal users may access it.
STARTUP NOMOUNT - Instance startup
STARTUP MOUNT - The database is mounted
STARTUP OPEN - The database is opened
16. What column differentiates the V$ views to the GV$ views and how?
The INST_ID column which indicates the instance in a RAC environment the information came from.
17. How would you go about generating an EXPLAIN plan?
Create a plan table with utlxplan.sql.
Use the explain plan set statement_id = 'tst1' into plan_table for a SQL statement
Look at the explain plan with utlxplp.sql or utlxpls.sql
18. How would you go about increasing the buffer cache hit ratio?
Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.
19. Explain an ORA-01555.
You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.
20. Explain the difference between $ORACLE_HOME and $ORACLE_BASE.
ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.

Oracle Interview Questions

1. How would you determine the time zone under which a database was operating?
SELECT dbtimezone FROM DUAL;
2. Explain the use of setting GLOBAL_NAMES equal to TRUE.
It ensure the use of consistent naming conventions for databases and links in a networked environment.
3. What command would you use to encrypt a PL/SQL application?
WRAP
4. Explain the difference between a FUNCTION, PROCEDURE and PACKAGE.
They are all named PL/SQL blocks.
Function must return a value. Can be called inside a query.
Procedure may or may not return value.
Package is the collection of functions, procedures, variables which can be logically grouped together.
5. Explain the use of table functions.
6. Name three advisory statistics you can collect.
7. Where in the Oracle directory tree structure are audit traces placed?
8. Explain materialized views and how they are used.
9. When a user process fails, what background process cleans up after it?
PMON
10. What background process refreshes materialized views?
Job Queue Process (CJQ)
11. How would you determine what sessions are connected and what resources they are waiting for?
v$session,v$session_wait
12. Describe what redo logs are.
13. How would you force a log switch?
alter system switch logfile;
14. Give two methods you could use to determine what DDL changes have been made.
15. What does coalescing a tablespace do?
Coalesce simply takes contigous free extents and makes them into a single bigger free extent.
16. What is the difference between a TEMPORARY tablespace and a PERMANENT tablespace?
TEMP tablespace gets cleared once the transaction is done where as PERMANENT tablespace retails the data.
17. Name a tablespace automatically created when you create a database.
SYSTEM
18. When creating a user, what permissions must you grant to allow them to connect to the database?
Grant create session to username;
19. How do you add a data file to a tablespace?
alter tablespace USERS add datafile '/ora01/oradata/users02.dbf' size 50M;
20. How do you resize a data file?
alter database datafile '/ora01/oradata/users02.dbf' resize 100M;
21. What view would you use to look at the size of a data file?
dba_data_files
22. What view would you use to determine free space in a tablespace?
dba_free_space
23. How would you determine who has added a row to a table?
By implementing an INSERT trigger for logging details during each INSERT operation on the table
24. How can you rebuild an index?
ALTER INDEX index_name REBUILD;
25. Explain what partitioning is and what its benefit is.
A table partition is also a table segment, and by using partitioning technique we can enhance performance of table access.
26. You have just compiled a PL/SQL package but got errors, how would you view the errors?
show errors
27. How can you gather statistics on a table?
exec dbms_stats.gather_table_stats
Also, remember to analyze all associated indexes on that table using dbms_stats.gather_index_stats
28. How can you enable a trace for a session?
alter session set sql_trace='TRUE';
29. What is the difference between the SQL*Loader and IMPORT utilities?
SQL*LOADER loads external data which is in OS files to oracle database tables while IMPORT utility imports data only which is exported by EXPORT utility of oracle database.
30. Name two files used for network connection to a database.
TNSNAMES.ORA and SQLNET.ORA

Oracle Reports Interview Questions and Answers

Interview questions and answers for Oracle Reports  Interview Questions and Answers
Oracle Reports Interview Questions and Answers includes, different file extensions that are created by oracle reports, designation, lexical reference, bind reference, use of command line parameter cmd file, external pl/sql library executed, default parameter, read level consistency, term, link property sheet, place holder column, hidden column, break group, anchors, matrix object, layout editor of the report writer, term panel, anchoring object, frame & repeating frame.

1. What are the different file extensions that are created by oracle reports?
Rep file and Rdf file.
 
2. From which designation is it preferred to send the output to the printed?
Previewer.
 
3. Is it possible to disable the parameter from while running the report?
Yes
 
4. What is lexical reference?How can it be created?
Lexical reference is place_holder for text that can be embedded in a sql statements.A lexical reference can be created using & before the column or parameter name.
 
5. What is bind reference and how can it carate?
Bind reference are used to replace the single value in sql,pl/sql statements a bind reference can be careated using a (:) before a column or a parameter name.
 
6. What use of command line parameter cmd file?
It is a command line argument that allows you to specify a file that contain a set of arguments for r20run.
 
7. Where is a procedure return in an external pl/sql library executed at the client or at the server?
At the client.
 
8. Where is the external query executed at the client or the server?
At the server.
 
9. What are the default parameter that appear at run time in the parameter screen?
Destype and Desname.
 
10. Which parameter can be used to set read level consistency across multiple queries?
Read only.
 
11. What is term?
  The term is terminal definition file that describes the terminal form which you are using r20run.
 
12. What is use of term?
  The term file which key is correspond to which oracle report functions.
 
13. Is it possible to insert comments into sql statements return in the data model editor?
  Yes.
 
14. If the maximum record retrieved property of the query is set to 10 then a summary value will be calculated?
  Only for 10 records.
 
15. What are the sql clauses supported in the link property sheet?
Where startwith having.
 
16. To execute row from being displayed that still use column in the row which property can be used?
Format trigger.
 
17. Is it possible to set a filter condition in a cross product group in matrix reports?
No.
 
18. If a break order is set on a column would it effect columns which are under the column?
No.
 
19. With which function of summary item is the compute at options required?
percentage of total functions.
 
20. What is the purpose of the product order option in the column property sheet?
To specify the order of individual group evaluation in a cross products.
 
21. Can a formula column be obtained through a select statement?
Yes.
 
22. Can a formula column refered to columns in higher group?
Yes.
 
23. How can a break order be created on a column in an existing group?
  By dragging the column outside the group.
 
24. What are the types of calculated columns available?
  Summary, Formula, Placeholder column.
 
25. What is the use of place holder column?
A placeholder column is used to hold a calculated values at a specified place rather than allowing is to appear in the actual row where it has to appeared.
 
26. What is the use of hidden column?
A hidden column is used to when a column has to embedded into boilerplate text.
 
27. What is the use of break group?
A break group is used to display one record for one group ones.While multiple related records in other group can be displayed.
 
28.. If two groups are not linked in the data model editor, what is the hierarchy between them?
Two group that is above are the left most rank higher than the group that is to right or below it.
 
29. The join defined by the default data link is an outer join yes or no?
Yes.
 
30. How can a text file be attached to a report while creating in the report writer?
By using the link file property in the layout boiler plate property sheet.
 
31. Can a repeating frame be careated without a data group as a base?
No.
 
32. Can a field be used in a report wihtout it appearing in any data group?
Yes.
 
33. For a field in a repeating frame, can the source come from the column which does not exist in the data group which forms the base for the frame?
Yes.
 
34. Is it possible to center an object horizontally in a repeating frame that has a variable horizontal size?
Yes.
 
35. If yes,how?
By the use anchors.
36. What are the two repeating frame always associated with matrix object?
One down repeating frame below one across repeating frame.
 
37. Is it possible to split the printpreviewer into more than one region?
Yes.
 
38. Does a grouping done for objects in the layout editor affect the grouping done in the datamodel editor?
No.
 
39. How can a square be drawn in the layout editor of the report writer?
By using the rectangle tool while pressing the (Constraint) key.
 
40. To display the page no. for each page on a report what would be the source & logical page no. or & of physical page no.?
& physical page no.
 
41. What does the term panel refer to with regard to pages?
A panel is the no. of physical pages needed to print one logical page.
 
42. What is an anchoring object & what is its use?
An anchoring object is a print condition object which used to explicitly or implicitly anchor other objects to itself.
 
43. What is a physical page? & what is a logical page?
A physical page is a size of a page. That is output by the printer. The logical page is the size of one page of the actual report as seen in the Previewer.
 
44. What is the frame & repeating frame?
A frame is a holder for a group of fields. A repeating frame is used to display a set of records when the no. of records that are to displayed is not known before.


Monday, December 2, 2013

PL/SQL Pogramming Language - Quick Guide

The PL/SQL programming language was developed by Oracle Corporation in the late 1980s as procedural extension language for SQL and the Oracle relational database. Following are notable facts about PL/SQL:
  • PL/SQL is a completely portable, high-performance transaction-processing language.
  • PL/SQL provides a built-in interpreted and OS independent programming environment.
  • PL/SQL can also directly be called from the command-line SQL*Plus interface.
  • Direct call can also be made from external programming language calls to database.
  • PL/SQL's general syntax is based on that of ADA and Pascal programming language.
  • Apart from Oracle, PL/SQL is available in TimesTen in-memory database and IBM DB2.

PL/SQL - Environment Setup

PL/SQL is not a stand-alone programming language; it is a tool within the Oracle programming environment. SQL* Plus is an interactive tool that allows you to type SQL and PL/SQL statements at the command prompt. These commands are then sent to the database for processing. Once the statements are processed, the results are sent back and displayed on screen.
To run PL/SQL programs, you should have Oracle RBDMS Server installed in your machine which will take care of executing SQL commands. Most recent version of Oracle RDBMS is 11g. You can download a trial version of Oracle 11g from the following link:
Download Oracle 11g Express Edition
You will have to download either 32bit or 64 bit version of the installation as per your operating system. Usually there are two files, as I have downloaded for 64 bit Windows7. You will also use similar steps on your operating system, does not matter if it is Linux or Solaris.
  • win64_11gR2_database_1of2.zip
  • win64_11gR2_database_2of2.zip
After downloading above two files, you will need to unzip them in a single directory database and under that you will find following sub-directories:

Oracle Sub Directries
 Finally, click on setup file to start the installation and follow the given steps till the end. If everything has been done successfully then its time to verify your installation. At your command prompt use the following command if you are using Windows:
sqlplus "/ as sysdba" 
 
If everything is fine, you should have SQL prompt where you will write your PL/SQL commands and scripts:


PL/SQL Command Prompt

Text Editor

Running large programs from command prompt may land you in inadvertently losing some of the work. So a better option is to use command files. To use the command files:
  • Type your code in a text editor, like Notepad, Notepad+, or EditPlus, etc.
  • Save the file with the .sql extension in the home directory.
  • Launch SQL*Plus command prompt from the directory where you created your PL/SQL file.
  • Type @file_name at the SQL*Plus command prompt to execute your program.
If you are not using a file to execute PL/SQL scripts, then simply copy your PL/SQL code and then right click on the black window having SQL prompt and use paste option to paste complete code at the command prompt. Finally, just press enter to execute the code, if it is not already executed.

PL/SQL - Basic Syntax

PL/SQL is a block-structured language, meaning that PL/SQL programs are divided and written in logical blocks of code. Each block consists of three sub-parts:
S.N.Sections & Description
1Declarations
This section starts with the keyword DECLARE. It is an optional section and defines all variables, cursors, subprograms, and other elements to be used in the program.
2Executable Commands
This section is enclosed between the keywords BEGIN and END and it is a mandatory section. It consists of the executable PL/SQL statements of the program. It should have at least one executable line of code, which may be just a NULL command to indicate that nothing should be executed.
3Exception Handling
This section starts with the keyword EXCEPTION. This section is again optional and contains exception(s) that handle errors in the program.
Every PL/SQL statement ends with a semicolon (;). PL/SQL blocks can be nested within other PL/SQL blocks using BEGIN and END. Here is the basic structure of a PL/SQL block:
DECLARE
   <declarations section>
BEGIN
   <executable command(s)>
EXCEPTION
   <exception handling>
END;

The 'Hello World' Example:

DECLARE
   message  varchar2(20):= 'Hello, World!';
BEGIN
   dbms_output.put_line(message);
END;
/
The end; line signals the end of the PL/SQL block. To run the code from SQL command line, you may need to type / at the beginning of the first blank line after the last line of the code. When the above code is executed at SQL prompt, it produces following result:
Hello World

PL/SQL procedure successfully completed.

PL/SQL - Data Types

PL/SQL variables, constants and parameters must have a valid data type which specifies a storage format, constraints, and valid range of values. This tutorial will take you through SCALAR and LOB data types available in PL/SQL and other two data types will be covered in other chapters.
CategoryDescription
ScalarSingle values with no internal components, such as a NUMBER, DATE, or BOOLEAN.
Large Object (LOB)Pointers to large objects that are stored separately from other data items, such as text, graphic images, video clips, and sound waveforms.
CompositeData items that have internal components that can be accessed individually. For example, collections and records.
ReferencePointers to other data items.

PL/SQL Scalar Data Types and Subtypes

PL/SQL Scalar Data Types and Subtypes come under the following categories:
Date TypeDescription
NumericNumeric values on which arithmetic operations are performed.
CharacterAlphanumeric values that represent single characters or strings of characters.
BooleanLogical values on which logical operations are performed.
DatetimeDates and times.
PL/SQL provides subtypes of data types. For example, the data type NUMBER has a subtype called INTEGER. You can use subtypes in your PL/SQL program to make the data types compatible with data types in other programs while embedding PL/SQL code in another program, such as a Java program.

PL/SQL Numeric Data Types and Subtypes

Following is the detail of PL/SQL pre-defined numeric data types and their sub-types:
Data TypeDescription
PLS_INTEGERSigned integer in range -2,147,483,648 through 2,147,483,647, represented in 32 bits
BINARY_INTEGERSigned integer in range -2,147,483,648 through 2,147,483,647, represented in 32 bits
BINARY_FLOATSingle-precision IEEE 754-format floating-point number
BINARY_DOUBLEDouble-precision IEEE 754-format floating-point number
NUMBER(prec, scale)Fixed-point or floating-point number with absolute value in range 1E-130 to (but not including) 1.0E126. A NUMBER variable can also represent 0.
DEC(prec, scale)ANSI specific fixed-point type with maximum precision of 38 decimal digits.
DECIMAL(prec, scale)IBM specific fixed-point type with maximum precision of 38 decimal digits.
NUMERIC(pre, secale)Floating type with maximum precision of 38 decimal digits.
DOUBLE PRECISIONANSI specific floating-point type with maximum precision of 126 binary digits (approximately 38 decimal digits)
FLOATANSI and IBM specific floating-point type with maximum precision of 126 binary digits (approximately 38 decimal digits)
INTANSI specific integer type with maximum precision of 38 decimal digits
INTEGERANSI and IBM specific integer type with maximum precision of 38 decimal digits
SMALLINTANSI and IBM specific integer type with maximum precision of 38 decimal digits
REALFloating-point type with maximum precision of 63 binary digits (approximately 18 decimal digits)
Following is a valid declaration:
DECLARE
   num1 INTEGER;
   num2 REAL;
   num3 DOUBLE PRECISION;
BEGIN
   null;
END;
/
When the above code is compiled and executed, it produces the following result:
PL/SQL procedure successfully completed

PL/SQL Character Data Types and Subtypes

Following is the detail of PL/SQL pre-defined character data types and their sub-types:
Data TypeDescription
CHARFixed-length character string with maximum size of 32,767 bytes
VARCHAR2Variable-length character string with maximum size of 32,767 bytes
RAWVariable-length binary or byte string with maximum size of 32,767 bytes, not interpreted by PL/SQL
NCHARFixed-length national character string with maximum size of 32,767 bytes
NVARCHAR2Variable-length national character string with maximum size of 32,767 bytes
LONGVariable-length character string with maximum size of 32,760 bytes
LONG RAWVariable-length binary or byte string with maximum size of 32,760 bytes, not interpreted by PL/SQL
ROWIDPhysical row identifier, the address of a row in an ordinary table
UROWIDUniversal row identifier (physical, logical, or foreign row identifier)

PL/SQL Boolean Data Types

The BOOLEAN data type stores logical values that are used in logical operations. The logical values are the Boolean values TRUE and FALSE and the value NULL.
However, SQL has no data type equivalent to BOOLEAN. Therefore, Boolean values cannot be used in:
  • SQL statements
  • Built-in SQL functions (such as TO_CHAR)
  • PL/SQL functions invoked from SQL statements

PL/SQL Datetime and Interval Types

The DATE datatype to store fixed-length datetimes, which include the time of day in seconds since midnight. Valid dates range from January 1, 4712 BC to December 31, 9999 AD.
The default date format is set by the Oracle initialization parameter NLS_DATE_FORMAT. For example, the default might be 'DD-MON-YY', which includes a two-digit number for the day of the month, an abbreviation of the month name, and the last two digits of the year, for example, 01-OCT-12.
Each DATE includes the century, year, month, day, hour, minute, and second. The following table shows the valid values for each field:
Field NameValid Datetime ValuesValid Interval Values
YEAR-4712 to 9999 (excluding year 0)Any nonzero integer
MONTH01 to 120 to 11
DAY01 to 31 (limited by the values of MONTH and YEAR, according to the rules of the calendar for the locale)Any nonzero integer
HOUR00 to 230 to 23
MINUTE00 to 590 to 59
SECOND00 to 59.9(n), where 9(n) is the precision of time fractional seconds0 to 59.9(n), where 9(n) is the precision of interval fractional seconds
TIMEZONE_HOUR-12 to 14 (range accommodates daylight savings time changes)Not applicable
TIMEZONE_MINUTE00 to 59Not applicable
TIMEZONE_REGIONFound in the dynamic performance view V$TIMEZONE_NAMESNot applicable
TIMEZONE_ABBRFound in the dynamic performance view V$TIMEZONE_NAMESNot applicable

PL/SQL Large Object (LOB) Data Types

Large object (LOB) data types refer large to data items such as text, graphic images, video clips, and sound waveforms. LOB data types allow efficient, random, piecewise access to this data. Following are the predefined PL/SQL LOB data types:
Data TypeDescriptionSize
BFILEUsed to store large binary objects in operating system files outside the database.System-dependent. Cannot exceed 4 gigabytes (GB).
BLOBUsed to store large binary objects in the database.8 to 128 terabytes (TB)
CLOBUsed to store large blocks of character data in the database.8 to 128 TB
NCLOBUsed to store large blocks of NCHAR data in the database.8 to 128 TB

PL/SQL User-Defined Subtypes

A subtype is a subset of another data type, which is called its base type. A subtype has the same valid operations as its base type, but only a subset of its valid values.
PL/SQL predefines several subtypes in package STANDARD. For example, PL/SQL predefines the subtypes CHARACTER and INTEGER as follows:
SUBTYPE CHARACTER IS CHAR;
SUBTYPE INTEGER IS NUMBER(38,0);
You can define and use your own subtypes. The following program illustrates defining and using a user-defined subtype:
DECLARE
   SUBTYPE name IS char(20);
   SUBTYPE message IS varchar2(100);
   salutation name;
   greetings message;
BEGIN
   salutation := 'Reader ';
   greetings := 'Welcome to the World of PL/SQL';
   dbms_output.put_line('Hello ' || salutation || greetings);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Hello Reader Welcome to the World of PL/SQL

PL/SQL procedure successfully completed.

NULLs in PL/SQL

PL/SQL NULL values represent missing or unknown data and they are not an integer, a character, or any other specific data type. Note that NULL is not the same as an empty data string or the null character value '\0'. A null can be assigned but it cannot be equated with anything, including itself.

PL/SQL - Variables

The name of a PL/SQL variable consists of a letter optionally followed by more letters, numerals, dollar signs, underscores, and number signs and should not exceed 30 characters. By default, variable names are not case-sensitive. You cannot use a reserved PL/SQL keyword as a variable name.

Variable Declaration in PL/SQL

PL/SQL variables must be declared in the declaration section or in a package as a global variable. When you declare a variable, PL/SQL allocates memory for the variable's value and the storage location is identified by the variable name.
The syntax for declaring a variable is:
variable_name [CONSTANT] datatype [NOT NULL] [:= | DEFAULT initial_value]
Where, variable_name is a valid identifier in PL/SQL, datatype must be a valid PL/SQL data type or any user defined data type which we already have discussed in last chapter. Some valid variable declarations along with their definition are shown below:
sales number(10, 2);
pi CONSTANT double precision := 3.1415;
name varchar2(25);
address varchar2(100);
When you provide a size, scale or precision limit with the data type, it is called a constrained declaration. Constrained declarations require less memory than unconstrained declarations. For example:
sales number(10, 2);
name varchar2(25);
address varchar2(100);

Initializing Variables in PL/SQL

Whenever you declare a variable, PL/SQL assigns it a default value of NULL. If you want to initialize a variable with a value other than the NULL value, you can do so during the declaration, using either of the following:
  • The DEFAULT keyword
  • The assignment operator
For example:
counter binary_integer := 0;
greetings varchar2(20) DEFAULT 'Have a Good Day';
You can also specify that a variable should not have a NULL value using the NOT NULL constraint. If you use the NOT NULL constraint, you must explicitly assign an initial value for that variable.
It is a good programming practice to initialize variables properly otherwise, sometime program would produce unexpected result. Try the following example which makes use of various types of variables:
DECLARE
   a integer := 10;
   b integer := 20;
   c integer;
   f real;
BEGIN
   c := a + b;
   dbms_output.put_line('Value of c: ' || c);
   f := 70.0/3.0;
   dbms_output.put_line('Value of f: ' || f);
END;
/
When the above code is executed, it produces the following result:
Value of c: 30
Value of f: 23.333333333333333333

PL/SQL procedure successfully completed.

Variable Scope in PL/SQL

PL/SQL allows the nesting of Blocks, i.e., each program block may contain another inner block. If a variable is declared within an inner block, it is not accessible to the outer block. However, if a variable is declared and accessible to an outer Block, it is also accessible to all nested inner Blocks. There are two types of variable scope:
  • Local variables - variables declared in an inner block and not accessible to outer blocks.
  • Global variables - variables declared in the outermost block or a package.
Following example shows the usage of Local and Global variables in its simple form:
DECLARE
   -- Global variables 
   num1 number := 95; 
   num2 number := 85; 
BEGIN 
   dbms_output.put_line('Outer Variable num1: ' || num1);
   dbms_output.put_line('Outer Variable num2: ' || num2);
   DECLARE 
      -- Local variables
      num1 number := 195; 
      num2 number := 185; 
   BEGIN 
      dbms_output.put_line('Inner Variable num1: ' || num1);
      dbms_output.put_line('Inner Variable num2: ' || num2);
   END; 
END;
/
When the above code is executed, it produces the following result:
Outer Variable num1: 95
Outer Variable num2: 85
Inner Variable num1: 195
Inner Variable num2: 185

PL/SQL procedure successfully completed.

PL/SQL - Constants and Literals

A constant holds a value that once declared, does not change in the program. A constant declaration specifies its name, data type, and value, and allocates storage for it. The declaration can also impose the NOT NULL constraint.

Declaring a Constant

A constant is declared using the CONSTANT keyword. It requires an initial value and does not allow that value to be changed. For example:
PI CONSTANT NUMBER := 3.141592654;
DECLARE
   -- constant declaration
   pi constant number := 3.141592654;
   -- other declarations
   radius number(5,2); 
   dia number(5,2); 
   circumference number(7, 2);
   area number (10, 2);
BEGIN 
   -- processing
   radius := 9.5; 
   dia := radius * 2; 
   circumference := 2.0 * pi * radius;
   area := pi * radius * radius;
   -- output
   dbms_output.put_line('Radius: ' || radius);
   dbms_output.put_line('Diameter: ' || dia);
   dbms_output.put_line('Circumference: ' || circumference);
   dbms_output.put_line('Area: ' || area);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Radius: 9.5
Diameter: 19
Circumference: 59.69
Area: 283.53

Pl/SQL procedure successfully completed.

The PL/SQL Literals

A literal is an explicit numeric, character, string, or Boolean value not represented by an identifier. For example, TRUE, 786, NULL, 'tutorialspoint' are all literals of type Boolean, number, or string. PL/SQL, literals are case-sensitive. PL/SQL supports the following kinds of literals:
  • Numeric Literals
  • Character Literals
  • String Literals
  • BOOLEAN Literals
  • Date and Time Literals
The following table provides examples from all these categories of literal values.
Literal TypeExample:
Numeric Literals050 78 -14 0 +32767
6.6667 0.0 -12.0 3.14159 +7800.00
6E5 1.0E-8 3.14159e0 -1E38 -9.5e-3
Character Literals'A' '%' '9' ' ' 'z' '('
String Literals'Hello, world!'
'Tutorials Point'
'19-NOV-12'
BOOLEAN LiteralsTRUE, FALSE, and NULL.
Date and Time LiteralsDATE '1978-12-25';
TIMESTAMP '2012-10-29 12:01:01';
To embed single quotes within a string literal, place two single quotes next to each other as shown below:
DECLARE
   message  varchar2(20):= ''That''s tutorialspoint.com!'';
BEGIN
   dbms_output.put_line(message);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
That's tutorialspoint.com!

PL/SQL procedure successfully completed.

PL/SQL - Operators

An operator is a symbol that tells the compiler to perform specific mathematical or logical manipulation. PL/SQL language is rich in built-in operators and provides the following type of operators:
  • Arithmetic operators
  • Relational operators
  • Comparison operators
  • Logical operators
  • String operators
This tutorial will explain the arithmetic, relational, comparison and logical operators one by one. The String operators will be discussed under the chapter: PL/SQL - Strings.

Arithmetic Operators

Following table shows all the arithmetic operators supported by PL/SQL. Assume variable A holds 10 and variable B holds 5 then:
OperatorDescriptionExample
+Adds two operandsA + B will give 15
-Subtracts second operand from the firstA - B will give 5
*Multiplies both operandsA * B will give 50
/Divides numerator by de-numeratorA / B will give 2
**Exponentiation operator, raises one operand to the power of otherA ** B will give 100000

Relational Operators

Relational operators compare two expressions or values and return a Boolean result. Following table shows all the relational operators supported by PL/SQL. Assume variable A holds 10 and variable B holds 20, then:
OperatorDescriptionExample
=Checks if the values of two operands are equal or not, if yes then condition becomes true.(A = B) is not true.
!=
<>
~=
Checks if the values of two operands are equal or not, if values are not equal then condition becomes true.(A != B) is true.
>Checks if the value of left operand is greater than the value of right operand, if yes then condition becomes true.(A > B) is not true.
<Checks if the value of left operand is less than the value of right operand, if yes then condition becomes true.(A < B) is true.
>=Checks if the value of left operand is greater than or equal to the value of right operand, if yes then condition becomes true.(A >= B) is not true.
<=Checks if the value of left operand is less than or equal to the value of right operand, if yes then condition becomes true.(A <= B) is true.

Comparison Operators

Comparison operators are used for comparing one expression to another. The result is always either TRUE, FALSE OR NULL.
OperatorDescriptionExample
LIKEThe LIKE operator compares a character, string, or CLOB value to a pattern and returns TRUE if the value matches the pattern and FALSE if it does not.If 'Zara Ali' like 'Z% A_i' returns a Boolean true, whereas, 'Nuha Ali' like 'Z% A_i' returns a Boolean false.
BETWEENThe BETWEEN operator tests whether a value lies in a specified range. x BETWEEN a AND b means that x >= a and x <= b. If x = 10 then, x between 5 and 20 returns true, x between 5 and 10 returns true, but x between 11 and 20 returns false.
INThe IN operator tests set membership. x IN (set) means that x is equal to any member of set. If x = 'm' then, x in ('a', 'b', 'c') returns boolean false but x in ('m', 'n', 'o') returns Boolean true.
IS NULLThe IS NULL operator returns the BOOLEAN value TRUE if its operand is NULL or FALSE if it is not NULL. Comparisons involving NULL values always yield NULL. If x = 'm', then 'x is null' returns Boolean false.

Logical Operators

Following table shows the Logical operators supported by PL/SQL. All these operators work on Boolean operands and produces Boolean results. Assume variable A holds true and variable B holds false, then:
OperatorDescriptionExample
andCalled logical AND operator. If both the operands are true then condition becomes true.(A and B) is false.
orCalled logical OR Operator. If any of the two operands is true then condition becomes true.(A or B) is true.
notCalled logical NOT Operator. Used to reverse the logical state of its operand. If a condition is true then Logical NOT operator will make it false.not (A and B) is true.

PL/SQL Operator Precedence

Operator precedence determines the grouping of terms in an expression. This affects how an expression is evaluated. Certain operators have higher precedence than others; for example, the multiplication operator has higher precedence than the addition operator:
For example x = 7 + 3 * 2; here, x is assigned 13, not 20 because operator * has higher precedence than +, so it first gets multiplied with 3*2 and then adds into 7.
Here operators with the highest precedence appear at the top of the table, those with the lowest appear at the bottom. Within an expression, higher precedence operators will be evaluated first.
OperatorOperation
**exponentiation
+, -identity, negation
*, /multiplication, division
+, -, ||addition, subtraction, concatenation
=, <, >, <=, >=, <>, !=, ~=, ^=,
IS NULL, LIKE, BETWEEN, IN
comparison
NOTlogical negation
ANDconjunction
ORinclusion

PL/SQL - Conditions

Decision-making structures require that the programmer specify one or more conditions to be evaluated or tested by the program, along with a statement or statements to be executed if the condition is determined to be true, and optionally, other statements to be executed if the condition is determined to be false.

IF-THEN Statement

It is the simplest form of IF control statement, frequently used in decision making and changing the control flow of the program execution.
The IF statement associates a condition with a sequence of statements enclosed by the keywords THEN and END IF. If the condition is TRUE, the statements get executed, and if the condition is FALSE or NULL, then the IF statement does nothing.

Syntax:

Syntax for IF-THEN statement is:
IF condition THEN 
   S;
END IF;
Where condition is a Boolean or relational condition and S is a simple or compound statement. Example of an IF-THEN statement is:
IF (a <= 20) THEN
   c:= c+1;
END IF;
If the Boolean expression condition evaluates to true, then the block of code inside the if statement will be executed. If Boolean expression evaluates to false, then the first set of code after the end of the if statement (after the closing end if) will be executed.

Flow Diagram:

PL/SQL if-then statement

IF-THEN-ELSE Statement

A sequence of IF-THEN statements can be followed by an optional sequence of ELSE statements, which execute when the condition is FALSE.

Syntax:

Syntax for the IF-THEN-ELSE statement is:
IF condition THEN
   S1; 
ELSE 
   S2;
END IF;
Where, S1 and S2 are different sequence of statements. In the IF-THEN-ELSE statements, when the test condition is TRUE, the statement S1 is executed and S2 is skipped; when the test condition is FALSE, then S1 is bypassed and statement S2 is executed. For example,
IF color = red THEN
  dbms_output.put_line('You have chosen a red car')
ELSE
  dbms_output.put_line('Please choose a color for your car');
END IF;
If the Boolean expression condition evaluates to true, then the if-then block of code will be executed, otherwise the else block of code will be executed.

Flow Diagram:

PL/SQL if-then-else statement

IF-THEN-ELSIF Statement

The IF-THEN-ELSIF statement allows you to choose between several alternatives. An IF-THEN statement can be followed by an optional ELSIF...ELSE statement. The ELSIF clause lets you add additional conditions.
When using IF-THEN-ELSIF statements there are few points to keep in mind.
  • It's ELSIF, not ELSEIF
  • An IF-THEN statement can have zero or one ELSE's and it must come after any ELSIF's.
  • An IF-THEN statement can have zero to many ELSIF's and they must come before the ELSE.
  • Once an ELSIF succeeds, none of the remaining ELSIF's or ELSE's will be tested.

Syntax:

The syntax of an IF-THEN-ELSIF Statement in PL/SQL programming language is:
IF(boolean_expression 1)THEN 
   S1; -- Executes when the boolean expression 1 is true 
ELSIF( boolean_expression 2) THEN
   S2;  -- Executes when the boolean expression 2 is true 
ELSIF( boolean_expression 3) THEN
   S3; -- Executes when the boolean expression 3 is true 
ELSE 
   S4; -- executes when the none of the above condition is true 
END IF;
 
 

CASE Statement

Like the IF statement, the CASE statement selects one sequence of statements to execute. However, to select the sequence, the CASE statement uses a selector rather than multiple Boolean expressions. A selector is an expression, whose value is used to select one of several alternatives.

Syntax:

The syntax for case statement in PL/SQL is:
CASE selector
    WHEN 'value1' THEN S1;
    WHEN 'value2' THEN S2;
    WHEN 'value3' THEN S3;
    ...
    ELSE Sn;  -- default case
END CASE;

Flow Diagram:

case statement in PL/SQL

Searched CASE Statement

The searched CASE statement has no selector and its WHEN clauses contain search conditions that give Boolean values.

Syntax:

The syntax for searched case statement in PL/SQL is:
CASE
    WHEN selector = 'value1' THEN S1;
    WHEN selector = 'value2' THEN S2;
    WHEN selector = 'value3' THEN S3;
    ...
    ELSE Sn;  -- default case
END CASE;

Flow Diagram:

case statement in PL/SQL

Nested IF-THEN-ELSE Statements

It is always legal in PL/SQL programming to nest IF-ELSE statements, which means you can use one IF or ELSE IF statement inside another IF or ELSE IF statement(s).

Syntax:

IF( boolean_expression 1)THEN
    -- executes when the boolean expression 1 is true 
    IF(boolean_expression 2) THEN
      -- executes when the boolean expression 2 is true 
      sequence-of-statements;
   END IF;
ELSE
   -- executes when the boolean expression 1 is not true
  else-statements;
END IF;

PL/SQL - Loops

There may be a situation when you need to execute a block of code several number of times. In general, statements are executed sequentially: The first statement in a function is executed first, followed by the second, and so on.
Programming languages provide various control structures that allow for more complicated execution paths.
A loop statement allows us to execute a statement or group of statements multiple times and following is the general form of a loop statement in most of the programming languages:

Loop Architecture

Basic Loop Statement

Basic loop structure encloses sequence of statements in between the LOOP and END LOOP statements. With each iteration, the sequence of statements is executed and then control resumes at the top of the loop.

Syntax:

The syntax of a basic loop in PL/SQL programming language is:
LOOP
  Sequence of statements;
END LOOP;
Here, sequence of statement(s) may be a single statement or a block of statements. An EXIT statement or an EXIT WHEN statement is required to break the loop.

WHILE LOOP Statement

A WHILE LOOP statement in PL/SQL programming language repeatedly executes a target statement as long as a given condition is true.

Syntax:

WHILE condition LOOP
   sequence_of_statements
END LOOP;

FOR LOOP Statement

A FOR LOOP is a repetition control structure that allows you to efficiently write a loop that needs to execute a specific number of times.

Syntax:

FOR counter IN initial_value .. final_value LOOP
   sequence_of_statements;
END LOOP;
Following are some special characteristics of PL/SQL for loop:
  • The initial_value and final_value of the loop variable or counter can be literals, variables, or expressions but must evaluate to numbers. Otherwise, PL/SQL raises the predefined exception VALUE_ERROR.
  • The initial_value need not to be 1; however, the loop counter increment (or decrement) must be 1.
  • PL/SQL allows determine the loop range dynamically at run time.

Nested Loops

PL/SQL allows using one loop inside another loop. Following section shows few examples to illustrate the concept.
The syntax for a nested basic LOOP statement in PL/SQL is as follows:
LOOP
   Sequence of statements1
   LOOP
      Sequence of statements2
   END LOOP;
END LOOP;
The syntax for a nested FOR LOOP statement in PL/SQL is as follows:
FOR counter1 IN initial_value1 .. final_value1 LOOP
   sequence_of_statements1
   FOR counter2 IN initial_value2 .. final_value2 LOOP
      sequence_of_statements2
   END LOOP;
END LOOP;
The syntax for a nested WHILE LOOP statement in Pascal is as follows:
WHILE condition1 LOOP
   sequence_of_statements1
   WHILE condition2 LOOP
      sequence_of_statements2
   END LOOP;
END LOOP;

EXIT Statement

The EXIT statement in PL/SQL programming language has following two usages:
  • When the EXIT statement is encountered inside a loop, the loop is immediately terminated and program control resumes at the next statement following the loop.
  • If you are using nested loops (i.e. one loop inside another loop), the EXIT statement will stop the execution of the innermost loop and start executing the next line of code after the block.

Syntax:

The syntax for a EXIT statement in PL/SQL is as follows:
EXIT;

Flow Diagram:

PL/SQL exit statement

CONTINUE Statement

The CONTINUE statement causes the loop to skip the remainder of its body and immediately retest its condition prior to reiterating. In other words, it forces the next iteration of the loop to take place, skipping any code in between.

Syntax:

The syntax for a CONTINUE statement is as follows:
CONTINUE;

Flow Diagram:


PL/SQL continue statement

GOTO Statement

A GOTO statement in PL/SQL programming language provides an unconditional jump from the GOTO to a labeled statement in the same subprogram.
NOTE: Use of GOTO statement is highly discouraged in any programming language because it makes difficult to trace the control flow of a program, making the program hard to understand and hard to modify. Any program that uses a GOTO can be rewritten so that it doesn't need the GOTO.

Syntax:

The syntax for a GOTO statement in PL/SQL is as follows:
GOTO label;
..
..
<< label >>
statement;

Flow Diagram:

PL/SQL goto statement

PL/SQL - Strings

The string in PL/SQL is actually a sequence of characters with an optional size specification. The characters could be numeric, letters, blank, special characters or a combination of all. PL/SQL offers three kinds of strings:
  • Fixed-length strings: In such strings, programmers specify the length while declaring the string. The string is right-padded with spaces to the length so specified.
  • Variable-length strings: In such strings, a maximum length up to 32,767, for the string is specified and no padding takes place.
  • Character large objects (CLOBs): These are variable-length strings that can be up to 128 terabytes.
PL/SQL strings could be either variables or literals. A string literal is enclosed within quotation marks. For example,
'This is a string literal.' Or 'hello world'
To include a single quote inside a string literal, you need to type two single quotes next to one another, like:
'this isn''t what it looks like'

Declaring String Variables

Oracle database provides numerous string datatypes , like, CHAR, NCHAR, VARCHAR2, NVARCHAR2, CLOB, and NCLOB. The datatypes prefixed with an 'N' are 'national character set' datatypes, that store Unicode character data.
If you need to declare a variable-length string, you must provide the maximum length of that string. For example, the VARCHAR2 data type. The following example illustrates declaring and using some string variables:
DECLARE
   name varchar2(20);
   company varchar2(30);
   introduction clob;
   choice char(1);
BEGIN
   name := 'John Smith';
   company := 'Infotech';
   introduction := ' Hello! I''m John Smith from Infotech.';
   choice := 'y';
   IF choice = 'y' THEN
      dbms_output.put_line(name);
      dbms_output.put_line(company);
      dbms_output.put_line(introduction);
   END IF;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
John Smith
Infotech Corporation
Hello! I'm John Smith from Infotech.

PL/SQL procedure successfully completed
To declare a fixed-length string, use the CHAR datatype. Here you do not have to specify a maximum length for a fixed-length variable. If you leave off the length constraint, Oracle Database automatically uses a maximum length required. So following two declarations below are identical:
 red_flag CHAR(1) := 'Y';
 red_flag CHAR    := 'Y';

PL/SQL - Arrays

PL/SQL programming language provides a data structure called the VARRAY, which can store a fixed-size sequential collection of elements of the same type. A varray is used to store an ordered collection of data, but it is often more useful to think of an array as a collection of variables of the same type.
All varrays consist of contiguous memory locations. The lowest address corresponds to the first element and the highest address to the last element.

Varrays in PL/SQL

An array is a part of collection type data and it stands for variable-size arrays. We will study other collection types in a later chapter 'PL/SQL Collections'.
Each element in a varray has an index associated with it. It also has a maximum size that can be changed dynamically.

Creating a Varray Type

A varray type is created with the CREATE TYPE statement. You must specify the maximum size and the type of elements stored in the varray.
The basic syntax for creating a VRRAY type at the schema level is:
CREATE OR REPLACE TYPE varray_type_name IS VARRAY(n) of <element_type>
Where,
  • varray_type_name is a valid attribute name,
  • n is the number of elements (maximum) in the varray,
  • element_type is the data type of the elements of the array.
Maximum size of a varray can be changed using the ALTER TYPE statement.
For example,
CREATE Or REPLACE TYPE namearray AS VARRAY(3) OF VARCHAR2(10);
/

Type created.
The basic syntax for creating a VRRAY type within a PL/SQL block is:

TYPE varray_type_name IS VARRAY(n) of <element_type>
For example:
TYPE namearray IS VARRAY(5) OF VARCHAR2(10);
Type grades IS VARRAY(5) OF INTEGER;

PL/SQL - Procedures

A subprogram is a program unit/module that performs a particular task. These subprograms are combined to form larger programs. This is basically called the 'Modular design'. A subprogram can be invoked by another subprogram or program which is called the calling program.
A subprogram can be created:
  • At schema level
  • Inside a package
  • Inside a PL/SQL block
A schema level subprogram is a standalone subprogram. It is created with the CREATE PROCEDURE or CREATE FUNCTION statement. It is stored in the database and can be deleted with the DROP PROCEDURE or DROP FUNCTION statement.
A subprogram created inside a package is a packaged subprogram. It is stored in the database and can be deleted only when the package is deleted with the DROP PACKAGE statement. We will discuss packages in the chapter 'PL/SQL - Packages'.
PL/SQL subprograms are named PL/SQL blocks that can be invoked with a set of parameters. PL/SQL provides two kinds of subprograms:
  • Functions: these subprograms return a single value, mainly used to compute and return a value.
  • Procedures: these subprograms do not return a value directly, mainly used to perform an action.
This chapter is going to cover important aspects of a PL/SQL procedure and we will cover PL/SQL function in next chapter.

Parts of a PL/SQL Subprogram

Each PL/SQL subprogram has a name, and may have a parameter list. Like anonymous PL/SQL blocks and, the named blocks a subprograms will also have following three parts:
S.N.Parts & Description
1Declarative Part
It is an optional part. However, the declarative part for a subprogram does not start with the DECLARE keyword. It contains declarations of types, cursors, constants, variables, exceptions, and nested subprograms. These items are local to the subprogram and cease to exist when the subprogram completes execution.
2Executable Part
This is a mandatory part and contains statements that perform the designated action.
3Exception-handling
This is again an optional part. It contains the code that handles run-time errors.

Creating a Procedure

A procedure is created with the CREATE OR REPLACE PROCEDURE statement. The simplified syntax for the CREATE OR REPLACE PROCEDURE statement is as follows:
CREATE [OR REPLACE] PROCEDURE procedure_name
[(parameter_name [IN | OUT | IN OUT] type [, ...])]
{IS | AS}
BEGIN
  < procedure_body >
END procedure_name;
Where,
  • procedure-name specifies the name of the procedure.
  • [OR REPLACE] option allows modifying an existing procedure.
  • The optional parameter list contains name, mode and types of the parameters. IN represents that value will be passed from outside and OUT represents that this parameter will be used to return a value outside of the procedure.
  • procedure-body contains the executable part.
  • The AS keyword is used instead of the IS keyword for creating a standalone procedure.

PL/SQL - Functions

A PL/SQL function is same as a procedure except that it returns a value.

Creating a Function

A standalone function is created using the CREATE FUNCTION statement. The simplified syntax for the CREATE OR REPLACE PROCEDURE statement is as follows:
CREATE [OR REPLACE] FUNCTION function_name
[(parameter_name [IN | OUT | IN OUT] type [, ...])]
RETURN return_datatype
{IS | AS}
BEGIN
   < function_body >
END [function_name];
Where,
  • function-name specifies the name of the function.
  • [OR REPLACE] option allows modifying an existing function.
  • The optional parameter list contains name, mode and types of the parameters. IN represents that value will be passed from outside and OUT represents that this parameter will be used to return a value outside of the procedure.
  • RETURN clause specifies that data type you are going to return from the function.
  • function-body contains the executable part.
  • function-body must contain a RETURN statement.
  • The AS keyword is used instead of the IS keyword for creating a standalone function.

PL/SQL - Cursors

Oracle creates a memory area, known as context area, for processing an SQL statement, which contains all information needed for processing the statement, for example, number of rows processed, etc.
A cursor is a pointer to this context area. PL/SQL controls the context area through a cursor. A cursor holds the rows (one or more) returned by a SQL statement. The set of rows the cursor holds is referred to as the active set.
You can name a cursor so that it could be referred to in a program to fetch and process the rows returned by the SQL statement, one at a time. There are two types of cursors:
  • Implicit cursors
  • Explicit cursors

Implicit Cursors

Implicit cursors are automatically created by Oracle whenever an SQL statement is executed, when there is no explicit cursor for the statement. Programmers cannot control the implicit cursors and the information in it.
Whenever a DML statement (INSERT, UPDATE and DELETE) is issued, an implicit cursor is associated with this statement. For INSERT operations, the cursor holds the data that needs to be inserted. For UPDATE and DELETE operations, the cursor identifies the rows that would be affected.
In PL/SQL, you can refer to the most recent implicit cursor as the SQL cursor, which always has the attributes like %FOUND, %ISOPEN, %NOTFOUND, and %ROWCOUNT. The SQL cursor has additional attributes, %BULK_ROWCOUNT and %BULK_EXCEPTIONS, designed for use with the FORALL statement.

Explicit Cursors

Explicit cursors are programmer defined cursors for gaining more control over the context area. An explicit cursor should be defined in the declaration section of the PL/SQL Block. It is created on a SELECT Statement which returns more than one row.
The syntax for creating an explicit cursor is :
CURSOR cursor_name IS select_statement;
Working with an explicit cursor involves four steps:
  • Declaring the cursor for initializing in the memory
  • Opening the cursor for allocating memory
  • Fetching the cursor for retrieving data
  • Closing the cursor to release allocated memory

Declaring the Cursor

Declaring the cursor defines the cursor with a name and the associated SELECT statement. For example:
CURSOR c_customers IS
   SELECT id, name, address FROM customers;

Opening the Cursor

Opening the cursor allocates memory for the cursor and makes it ready for fetching the rows returned by the SQL statement into it. For example, we will open above-defined cursor as follows:
OPEN c_customers;

Fetching the Cursor

Fetching the cursor involves accessing one row at a time. For example we will fetch rows from the above-opened cursor as follows:
FETCH c_customers INTO c_id, c_name, c_addr;

Closing the Cursor

Closing the cursor means releasing the allocated memory. For example, we will close above-opened cursor as follows:
CLOSE c_customers;

Example:

Following is a complete example to illustrate the concepts of explicit cursors:
DECLARE
   c_id customers.id%type;
   c_name customers.name%type;
   c_addr customers.address%type;
   CURSOR c_customers is
      SELECT id, name, address FROM customers;
BEGIN
   OPEN c_customers;
   LOOP
      FETCH c_customers into c_id, c_name, c_addr;
      dbms_output.put_line(c_id || ' ' || c_name || ' ' || c_addr);
      EXIT WHEN c_customers%notfound;
   END LOOP;
   CLOSE c_customers;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
1 Ramesh Ahmedabad 
2 Khilan Delhi 
3 kaushik Kota    
4 Chaitali Mumbai 
5 Hardik Bhopal  
6 Komal MP  

PL/SQL procedure successfully completed.

PL/SQL - Records

A PL/SQL record is a data structure that can hold data items of different kinds. Records consist of different fields, similar to a row of a database table.
PL/SQL can handle the following types of records:
  • Table-based
  • Cursor-based records
  • User-defined records

Table-Based Records

The %ROWTYPE attribute enables a programmer to create table-based and cursor-based records.
The following example would illustrate the concept of table-based records. We will be using the CUSTOMERS table we had created and used in the previous chapters:
DECLARE
   customer_rec customers%rowtype;
BEGIN
   SELECT * into customer_rec
   FROM customers
   WHERE id = 5;

   dbms_output.put_line('Customer ID: ' || customer_rec.id);
   dbms_output.put_line('Customer Name: ' || customer_rec.name);
   dbms_output.put_line('Customer Address: ' || customer_rec.address);
   dbms_output.put_line('Customer Salary: ' || customer_rec.salary);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Customer ID: 5
Customer Name: Hardik
Customer Address: Bhopal
Customer Salary: 9000

PL/SQL procedure successfully completed.

Cursor-Based Records

The following example would illustrate the concept of cursor-based records. We will be using the CUSTOMERS table we had created and used in the previous chapters:
DECLARE
   CURSOR customer_cur is
      SELECT id, name, address 
      FROM customers;
   customer_rec customer_cur%rowtype;
BEGIN
   OPEN customer_cur;
   LOOP
      FETCH customer_cur into customer_rec;
      EXIT WHEN customer_cur%notfound;
      DBMS_OUTPUT.put_line(customer_rec.id || ' ' || customer_rec.name);
   END LOOP;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
1 Ramesh
2 Khilan
3 kaushik
4 Chaitali
5 Hardik
6 Komal

PL/SQL procedure successfully completed.

User-Defined Records

PL/SQL provides a user-defined record type that allows you to define different record structures. Records consist of different fields. Suppose you want to keep track of your books in a library. You might want to track the following attributes about each book:
  • Title
  • Author
  • Subject
  • Book ID

Defining a Record

The record type is defined as:
TYPE
type_name IS RECORD
  ( field_name1  datatype1  [NOT NULL]  [:= DEFAULT EXPRESSION],
   field_name2   datatype2   [NOT NULL]  [:= DEFAULT EXPRESSION],
   ...
   field_nameN  datatypeN  [NOT NULL]  [:= DEFAULT EXPRESSION);
record-name  type_name;
Here is the way you would declare the Book record:
DECLARE
TYPE books IS RECORD
(title  varchar(50),
    author  varchar(50),
    subject varchar(100),
    book_id   number);
book1 books;
book2 books;

Accessing Fields

To access any field of a record, we use the dot (.) operator. The member access operator is coded as a period between the record variable name and the field that we wish to access. Following is the example to explain usage of record:
DECLARE
   type books is record
      (title varchar(50),
       author varchar(50),
       subject varchar(100),
       book_id number);
   book1 books;
   book2 books;
BEGIN
   -- Book 1 specification
   book1.title  := 'C Programming';
   book1.author := 'Nuha Ali '; 
   book1.subject := 'C Programming Tutorial';
   book1.book_id := 6495407;

   -- Book 2 specification
   book2.title := 'Telecom Billing';
   book2.author := 'Zara Ali';
   book2.subject := 'Telecom Billing Tutorial';
   book2.book_id := 6495700;

   -- Print book 1 record
   dbms_output.put_line('Book 1 title : '|| book1.title);
   dbms_output.put_line('Book 1 author : '|| book1.author);
   dbms_output.put_line('Book 1 subject : '|| book1.subject);
   dbms_output.put_line('Book 1 book_id : ' || book1.book_id);
  
   -- Print book 2 record
   dbms_output.put_line('Book 2 title : '|| book2.title);
   dbms_output.put_line('Book 2 author : '|| book2.author);
   dbms_output.put_line('Book 2 subject : '|| book2.subject);
   dbms_output.put_line('Book 2 book_id : '|| book2.book_id);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Book 1 title : C Programming
Book 1 author : Nuha Ali
Book 1 subject : C Programming Tutorial
Book 1 book_id : 6495407
Book 2 title : Telecom Billing
Book 2 author : Zara Ali
Book 2 subject : Telecom Billing Tutorial
Book 2 book_id : 6495700

PL/SQL procedure successfully completed.

PL/SQL - Exceptions

An error condition during a program execution is called an exception in PL/SQL. PL/SQL supports programmers to catch such conditions using EXCEPTION block in the program and an appropriate action is taken against the error condition. There are two types of exceptions:
  • System-defined exceptions
  • User-defined exceptions

Syntax for Exception Handling

The General Syntax for exception handling is as follows. Here, you can list down as many as exceptions you want to handle. The default exception will be handled using WHEN others THEN:
DECLARE
   <declarations section>
BEGIN
   <executable command(s)>
EXCEPTION
   <exception handling goes here >
   WHEN exception1 THEN 
       exception1-handling-statements 
   WHEN exception2  THEN 
      exception2-handling-statements 
   WHEN exception3 THEN 
      exception3-handling-statements
   ........
   WHEN others THEN
      exception3-handling-statements
END;

Example

Let us write some simple code to illustrate the concept. We will be using the CUSTOMERS table we had created and used in the previous chapters:
DECLARE
   c_id customers.id%type := 8;
   c_name  customers.name%type;
   c_addr customers.address%type;
BEGIN
   SELECT  name, address INTO  c_name, c_addr
   FROM customers
   WHERE id = c_id;

   DBMS_OUTPUT.PUT_LINE ('Name: '||  c_name);
   DBMS_OUTPUT.PUT_LINE ('Address: ' || c_addr);
EXCEPTION
   WHEN no_data_found THEN
      dbms_output.put_line('No such customer!');
   WHEN others THEN
      dbms_output.put_line('Error!');
END;
/
When the above code is executed at SQL prompt, it produces the following result:
No such customer!

PL/SQL procedure successfully completed.
The above program displays the name and address of a customer whose ID is given. Since there is no customer with ID value 8 in our database, the program raises the run-time exception NO_DATA_FOUND which is captured in EXCEPTION block.

PL/SQL - Triggers

Triggers are stored programs, which are automatically executed or fired when some events occur. Triggers are, in fact, written to be executed in response to any of the following events:
  • A database manipulation (DML) statement (DELETE, INSERT, or UPDATE).
  • A database definition (DDL) statement (CREATE, ALTER, or DROP).
  • A database operation (SERVERERROR, LOGON, LOGOFF, STARTUP, or SHUTDOWN).
Triggers could be defined on the table, view, schema, or database with which the event is associated.

Creating Triggers

The syntax for creating a trigger is:
CREATE [OR REPLACE ] TRIGGER trigger_name 
{BEFORE | AFTER | INSTEAD OF } 
{INSERT [OR] | UPDATE [OR] | DELETE} 
[OF col_name] 
ON table_name 
[REFERENCING OLD AS o NEW AS n] 
[FOR EACH ROW] 
WHEN (condition)  
DECLARE
   Declaration-statements
BEGIN 
   Executable-statements
EXCEPTION
   Exception-handling-statements
END;
Where,
  • CREATE [OR REPLACE] TRIGGER trigger_name : Creates or replaces an existing trigger with the trigger_name.
  • {BEFORE | AFTER | INSTEAD OF}: This specifies when the trigger would be executed. The INSTEAD OF clause is used for creating trigger on a view.
  • {INSERT [OR] | UPDATE [OR] | DELETE}: This specifies the DML operation.
  • [OF col_name]: This specifies the column name that would be updated.
  • [ON table_name]: This specifies the name of the table associated with the trigger.
  • [REFERENCING OLD AS o NEW AS n]: This allows you to refer new and old values for various DML statements, like INSERT, UPDATE, and DELETE.
  • [FOR EACH ROW]: This specifies a row level trigger, i.e., the trigger would be executed for each row being affected. Otherwise the trigger will execute just once when the SQL statement is executed, which is called a table level trigger.
  • WHEN (condition): This provides a condition for rows for which the trigger would fire. This clause is valid only for row level triggers.

Example:

To start with, we will be using the CUSTOMERS table:
Select * from customers;

+----+----------+-----+-----------+----------+
| ID | NAME     | AGE | ADDRESS   | SALARY   |
+----+----------+-----+-----------+----------+
|  1 | Ramesh   |  32 | Ahmedabad |  2000.00 |
|  2 | Khilan   |  25 | Delhi     |  1500.00 |
|  3 | kaushik  |  23 | Kota      |  2000.00 |
|  4 | Chaitali |  25 | Mumbai    |  6500.00 |
|  5 | Hardik   |  27 | Bhopal    |  8500.00 |
|  6 | Komal    |  22 | MP        |  4500.00 |
+----+----------+-----+-----------+----------+
The following program creates a row level trigger for the customers table that would fire for INSERT or UPDATE or DELETE operations performed on the CUSTOMERS table. This trigger will display the salary difference between the old values and new values:
CREATE OR REPLACE TRIGGER display_salary_changes
BEFORE DELETE OR INSERT OR UPDATE ON customers
FOR EACH ROW
WHEN (NEW.ID > 0)
DECLARE
   sal_diff number;
BEGIN
   sal_diff := :NEW.salary  - :OLD.salary;
   dbms_output.put_line('Old salary: ' || :OLD.salary);
   dbms_output.put_line('New salary: ' || :NEW.salary);
   dbms_output.put_line('Salary difference: ' || sal_diff);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Trigger created.
Here following two points are important and should be noted carefully:
  • OLD and NEW references are not available for table level triggers, rather you can use them for record level triggers.
  • If you want to query the table in the same trigger, then you should use the AFTER keyword, because triggers can query the table or change it again only after the initial changes are applied and the table is back in a consistent state.
  • Above trigger has been written in such a way that it will fire before any DELETE or INSERT or UPDATE operation on the table, but you can write your trigger on a single or multiple operations, for example BEFORE DELETE, which will fire whenever a record will be deleted using DELETE operation on the table.

PL/SQL - Packages

PL/SQL packages are schema objects that groups logically related PL/SQL types, variables and subprograms.
A package will have two mandatory parts:
  • Package specification
  • Package body or definition

Package Specification

The specification is the interface to the package. It just DECLARES the types, variables, constants, exceptions, cursors, and subprograms that can be referenced from outside the package. In other words, it contains all information about the content of the package, but excludes the code for the subprograms.
All objects placed in the specification are called public objects. Any subprogram not in the package specification but coded in the package body is called a private object.
The following code snippet shows a package specification having a single procedure. You can have many global variables defined and multiple procedures or functions inside a package.
CREATE PACKAGE cust_sal AS
   PROCEDURE find_sal(c_id customers.id%type);
END cust_sal;
/
When the above code is executed at SQL prompt, it produces the following result:
Package created.

Package Body

The package body has the codes for various methods declared in the package specification and other private declarations, which are hidden from code outside the package.
The CREATE PACKAGE BODY Statement is used for creating the package body. The following code snippet shows the package body declaration for the cust_sal package created above. I assumed that we already have CUSTOMERS table created in our database as mentioned in PL/SQL - Variables chapter.
CREATE OR REPLACE PACKAGE BODY cust_sal AS
   PROCEDURE find_sal(c_id customers.id%TYPE) IS
   c_sal customers.salary%TYPE;
   BEGIN
      SELECT salary INTO c_sal
      FROM customers
      WHERE id = c_id;
      dbms_output.put_line('Salary: '|| c_sal);
   END find_sal;
END cust_sal;
/
When the above code is executed at SQL prompt, it produces the following result:
Package body created.

Using the Package Elements

The package elements (variables, procedures or functions) are accessed with the following syntax:
package_name.element_name;
Consider, we already have created above package in our database schema, the following program uses the find_sal method of the cust_sal package:
DECLARE
   code customers.id%type := &cc_id;
BEGIN
   cust_sal.find_sal(code);
END;
/
When the above code is executed at SQL prompt, it prompt to enter customer ID, and when you enter an ID, it displays the corresponding salary as follows:
Enter value for cc_id: 1
Salary: 3000

PL/SQL procedure successfully completed.

PL/SQL - Collections

A collection is an ordered group of elements having the same data type. Each element is identified by a unique subscript that represents its position in the collection.
PL/SQL provides three collection types:
  • Index-by tables or Associative array
  • Nested table
  • Variable-size array or Varray

Index-By Table

An index-by table (also called an associative array) is a set of key-value pairs. Each key is unique, and is used to locate the corresponding value. The key can be either an integer or a string.
An index-by table is created using the following syntax. Here we are creating an index-by table named table_name whose keys will be of subscript_type and associated values will be of element_type
TYPE type_name IS TABLE OF element_type [NOT NULL] INDEX BY subscript_type;

table_name type_name;

Example:

Following example how to create a table to store integer values along with names and later it prints the same list of names.
DECLARE
   TYPE salary IS TABLE OF NUMBER INDEX BY VARCHAR2(20);
   salary_list salary;
   name   VARCHAR2(20);
BEGIN
   -- adding elements to the table
   salary_list('Rajnish')  := 62000;
   salary_list('Minakshi')  := 75000;
   salary_list('Martin') := 100000;
   salary_list('James') := 78000;

   -- printing the table
   name := salary_list.FIRST;
   WHILE name IS NOT null LOOP
      dbms_output.put_line
      ('Salary of ' || name || ' is ' || TO_CHAR(salary_list(name)));
      name := salary_list.NEXT(name);
   END LOOP;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Salary of Rajnish is 62000
Salary of Minakshi is 75000
Salary of Martin is 100000
Salary of James is 78000

PL/SQL procedure successfully completed.

Nested Tables

A nested table is like a one-dimensional array with an arbitrary number of elements. However, a nested table differs from an array in the following aspects:
  • An array has a declared number of elements, but a nested table does not. The size of a nested table can increase dynamically.
  • An array is always dense i.e., it always has consecutive subscripts. A nested array is dense initially, but it can become sparse when elements are deleted from it.
An nested table is created using the following syntax:
TYPE type_name IS TABLE OF element_type [NOT NULL];

table_name type_name;
This declaration is similar to declaration of an index-by table, but there is no INDEX BY clause.
A nested table can be stored in a database column and so it could be used for simplifying SQL operations where you join a single-column table with a larger table. An associative array cannot be stored in the database.

Example:

The following examples illustrate the use of nested table:
DECLARE
   TYPE names_table IS TABLE OF VARCHAR2(10);
   TYPE grades IS TABLE OF INTEGER;

   names names_table;
   marks grades;
   total integer;
BEGIN
   names := names_table('Kavita', 'Pritam', 'Ayan', 'Rishav', 'Aziz');
   marks:= grades(98, 97, 78, 87, 92);
   total := names.count;
   dbms_output.put_line('Total '|| total || ' Students');
   FOR i IN 1 .. total LOOP
      dbms_output.put_line('Student:'||names(i)||', Marks:' || marks(i));
   end loop;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Total 5 Students
Student:Kavita, Marks:98
Student:Pritam, Marks:97
Student:Ayan, Marks:78
Student:Rishav, Marks:87
Student:Aziz, Marks:92

PL/SQL procedure successfully completed.

PL/SQL - Transactions

A database transaction is an atomic unit of work that may consist of one or more related SQL statements. It is called atomic because the database modifications brought about by the SQL statements that constitute a transaction can collectively be either committed, i.e., made permanent to the database or rolled back (undone) from the database.
A successfully executed SQL statement and a committed transaction are not same. Even if an SQL statement is executed successfully, unless the transaction containing the statement is committed, it can be rolled back and all changes made by the statement(s) can be undone.

Starting an Ending a Transaction

A transaction has a beginning and an end. A transaction starts when one of the following events take place:
  • The first SQL statement is performed after connecting to the database.
  • At each new SQL statement issued after a transaction is completed.
A transaction ends when one of the following events take place:
  • A COMMIT or a ROLLBACK statement is issued.
  • A DDL statement, like CREATE TABLE statement, is issued; because in that case a COMMIT is automatically performed.
  • A DCL statement, such as a GRANT statement, is issued; because in that case a COMMIT is automatically performed.
  • User disconnects from the database.
  • User exits from SQL*PLUS by issuing the EXIT command, a COMMIT is automatically performed.
  • SQL*Plus terminates abnormally, a ROLLBACK is automatically performed.
  • A DML statement fails; in that case a ROLLBACK is automatically performed for undoing that DML statement.

Committing a Transaction

A transaction is made permanent by issuing the SQL command COMMIT. The general syntax for the COMMIT command is:
COMMIT;

Rolling Back Transactions

Changes made to the database without COMMIT could be undone using the ROLLBACK command.
The general syntax for the ROLLBACK command is:
ROLLBACK [TO SAVEPOINT < savepoint_name>];
When a transaction is aborted due to some unprecedented situation, like system failure, the entire transaction since a commit is automatically rolled back. If you are not using savepoiny, then simply use the following statement to rollback all the changes:
ROLLBACK;

Savepoints

Savepoints are sort of markers that help in splitting a long transaction into smaller units by setting some checkpoints. By setting savepoints within a long transaction, you can roll back to a checkpoint if required. This is done by issuing the SAVEPOINT command.
The general syntax for the SAVEPOINT command is:
SAVEPOINT < savepoint_name >;

Automatic Transaction Control

To execute a COMMIT automatically whenever an INSERT, UPDATE or DELETE command is executed, you can set the AUTOCOMMIT environment variable as:
SET AUTOCOMMIT ON;
You can turn-off auto commit mode using the following command:
SET AUTOCOMMIT OFF;

PL/SQL - Date & Time

PL/SQL provides two classes of date and time related data types:
  • Datetime data types
  • Interval data types
The Datetime data types are:
  • DATE
  • TIMESTAMP
  • TIMESTAMP WITH TIME ZONE
  • TIMESTAMP WITH LOCAL TIME ZONE
The Interval data types are:
  • INTERVAL YEAR TO MONTH
  • INTERVAL DAY TO SECOND

The Datetime Data Types

Following are the Datetime data types:
  • DATE - it stores date and time information in both character and number datatypes. It is made of information on century, year, month, date, hour, minute, and second. It is specified as:
  • TIMESTAMP - it is an extension of the DATE datatype. It stores the year, month, and day of the DATE datatype, along with hour, minute, and second values. It is useful for storing precise time values.
  • TIMESTAMP WITH TIME ZONE - it is a variant of TIMESTAMP that includes a time zone region name or a time zone offset in its value. The time zone offset is the difference (in hours and minutes) between local time and UTC. This datatype is useful for collecting and evaluating date information across geographic regions.
  • TIMESTAMP WITH LOCAL TIME ZONE - it is another variant of TIMESTAMP that includes a time zone offset in its value.

Examples:

SELECT SYSDATE FROM DUAL;
Output:
08/31/2012 5:25:34 PM
SELECT TO_CHAR(CURRENT_DATE, 'DD-MM-YYYY HH:MI:SS') FROM DUAL;
Output:
31-08-2012 05:26:14
SELECT ADD_MONTHS(SYSDATE, 5) FROM DUAL;
Output:
01/31/2013 5:26:31 PM
SELECT LOCALTIMESTAMP FROM DUAL;
Output:
8/31/2012 5:26:55.347000 PM

The Interval Data Types

Following are the Interval data types:
  • INTERVAL YEAR TO MONTH - it stores a period of time using the YEAR and MONTH datetime fields.
  • INTERVAL DAY TO SECOND - it stores a period of time in terms of days, hours, minutes, and seconds.

PL/SQL - DBMS Output

The DBMS_OUTPUT is a built-in package that enables you to display output, display debugging information, and send messages from PL/SQL blocks, subprograms, packages, and triggers.

Example:

DECLARE
   lines dbms_output.chararr;
   num_lines number;
BEGIN
   -- enable the buffer with default size 20000
   dbms_output.enable;
  
   dbms_output.put_line('Hello Reader!');
   dbms_output.put_line('Hope you have enjoyed the tutorials!');
   dbms_output.put_line('Have a great time exploring pl/sql!');
 
   num_lines := 3;
 
   dbms_output.get_lines(lines, num_lines);
 
   FOR i IN 1..num_lines LOOP
      dbms_output.put_line(lines(i));
   END LOOP;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Hello Reader!
Hope you have enjoyed the tutorials!
Have a great time exploring pl/sql!

PL/SQL procedure successfully completed.

PL/SQL - Object Oriented

PL/SQL allows defining an object type, which helps in designing object-oriented database in Oracle. An object type allows you to crate composite types. Using objects allow you implementing real world objects with specific structure of data and methods for operating it. Objects have attributes and methods. Attributes are properties of an object and are used for storing an object's state; and methods are used for modeling its behaviors.
Objects are created using the CREATE [OR REPLACE] TYPE statement. Below is an example to create a simple address object consisting of few attributes:
CREATE OR REPLACE TYPE address AS OBJECT
(house_no varchar2(10),
 street varchar2(30),
 city varchar2(20),
 state varchar2(10),
 pincode varchar2(10)
);
/
When the above code is executed at SQL prompt, it produces the following result:
Type created.
Let's create one more object customer where we will wrap attributes and methods together to have object oriented feeling:
CREATE OR REPLACE TYPE customer AS OBJECT
(code number(5),
 name varchar2(30),
 contact_no varchar2(12),
 addr address,
 member procedure display
);
/
When the above code is executed at SQL prompt, it produces the following result:
Type created.

Instantiating an Object

Defining an object type provides a blueprint for the object. To use this object, you need to create instances of this object. You can access the attributes and methods of the object using the instance name and the access operator (.) as follows:
DECLARE
   residence address;
BEGIN
   residence := address('103A', 'M.G.Road', 'Jaipur', 'Rajasthan','201301');
   dbms_output.put_line('House No: '|| residence.house_no);
   dbms_output.put_line('Street: '|| residence.street);
   dbms_output.put_line('City: '|| residence.city);
   dbms_output.put_line('State: '|| residence.state);
   dbms_output.put_line('Pincode: '|| residence.pincode);
END;
/
When the above code is executed at SQL prompt, it produces the following result:
House No: 103A
Street: M.G.Road
City: Jaipur
State: Rajasthan
Pincode: 201301

PL/SQL procedure successfully completed.

Inheritance for PL/SQL Objects:

PL/SQL allows creating object from existing base objects. To implement inheritance, the base objects should be declared as NOT FINAL. The default is FINAL.
The following programs illustrate inheritance in PL/SQL Objects. Let us create another object named TableTop which is inheriting from the Rectangle object. Creating the base rectangle object:
CREATE OR REPLACE TYPE rectangle AS OBJECT
(length number,
 width number,
 member function enlarge( inc number) return rectangle,
 NOT FINAL member procedure display) NOT FINAL
/
When the above code is executed at SQL prompt, it produces the following result:
Type created.
Creating the base type body:
CREATE OR REPLACE TYPE BODY rectangle AS
   MEMBER FUNCTION enlarge(inc number) return rectangle IS
   BEGIN
      return rectangle(self.length + inc, self.width + inc);
   END enlarge;

   MEMBER PROCEDURE display IS
   BEGIN
      dbms_output.put_line('Length: '|| length);
      dbms_output.put_line('Width: '|| width);
   END display;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Type body created.
Creating the child object tabletop:
CREATE OR REPLACE TYPE tabletop UNDER rectangle
(  
   material varchar2(20);
   OVERRIDING member procedure display
)
/
When the above code is executed at SQL prompt, it produces the following result:
Type created.
Creating the type body for the child object tabletop:
CREATE OR REPLACE TYPE BODY tabletop AS
OVERRIDING MEMBER PROCEDURE display IS
BEGIN
   dbms_output.put_line('Length: '|| length);
   dbms_output.put_line('Width: '|| width);
   dbms_output.put_line('Material: '|| material);
END display;
/
When the above code is executed at SQL prompt, it produces the following result:
Type body created.
Using the tabletop object and its member functions:
DECLARE
   t1 tabletop;
   t2 tabletop;
BEGIN
   t1:= tabletop(20, 10, 'Wood');
   t2 := tabletop(50, 30, 'Steel');
   t1.display;
   t2.display;
END;
/
When the above code is executed at SQL prompt, it produces the following result:
Length: 20
Width: 10
Material: Wood
Length: 50
Width: 30
Material: Steel

PL/SQL procedure successfully completed.

Abstract Objects in PL/SQL

The NOT INSTANTIABLE clause allows you to declare an abstract object. You cannot use an abstract object as it is; you will have to create a subtype or child type of such objects to use its functionalities.
For example,
CREATE OR REPLACE TYPE rectangle AS OBJECT
(length number,
 width number,
 NOT INSTANTIABLE NOT FINAL MEMBER PROCEDURE display) 
 NOT INSTANTIABLE NOT FINAL
/
When the above code is executed at SQL prompt, it produces the following result:
Type created.